Reasons and solutions for friction in the impeller of a Roots fan
Roots Fans葉輪在使用的過程中出現了摩擦的情況，那么遇見這樣的情況的原因和解決辦法是什么呢？羅茨風機小編帶您了解一下。
I. Causes
(1) There are contaminated impurities on the impeller, resulting in too small a gap;
(2) The gears are worn, resulting in a large backlash;
(3) The gears are not securely fastened to keep the impellers synchronized;
(4) Wear of the bearing increases the clearance.
II. Measures to address the problem
(1) Remove dirt and inspect internal parts for damage;
(2) Adjust the gear lash, if the gear side clearance is greater than the average value of 30% ~ 50% should replace the gear;
(3) Reassemble gears to maintain taper Fit contact area to 75%;
(4) Replace the bearings.
關于“羅茨風機葉輪出現摩擦的原因和解決辦法”羅茨風機小編就為您介紹到這里，如果你還想了解更多關于羅茨風機方面的知識可以登陸我們的網站咨詢了解。
